Aero Mould Co., Ltd
Mobile/whatsapp: 0086-13666469798
Add: 18# KaiTuo Road, XinQian Street, Huangyan District, Taizhou, Zhejiang, China
With the rapid economic development, various industries are also constantly developing, and the mold industry is no exception. Next, I will introduce the development trend of the mold industry in detail. 1. The developme...
1. Mould Quotation After the mold manufacturer receives the customer's sample or drawing inquiry, it should organize relevant engineers to review the drawing and make a preliminary quotation. 2. Points for Attention in C...
the reason 1. Injection pressure or barrel temperature 2. Too much feed 3. The advancing time of the pump is too long 4. Write more and feel the unbalanced feed inlet, 5. There are recesses in the mold 6. Deep tube part ...
1) The wall thickness should be as uniform as possible, and the draft angle should be large enough 2) The transition part should be smooth and gradually transition to prevent sharp corners and sharp edges, especially PC+...
Plastic mold grades are divided into grades according to production volume, product accuracy, customer requirements and quotations. Mass production molds, medium production molds, and small production molds. 1. Detailed ...
Disadvantages of silicone rubber mold 1. Poor thermal conductivity 2. Short life 3. Can't form real parts 4. The workpiece cannot be formed by hot injection process 5. The speed of mold making is diffuse. Silica gel usua...