Aero Mould Co., Ltd
Mobile/whatsapp: 0086-13666469798
Add: 18# KaiTuo Road, XinQian Street, Huangyan District, Taizhou, Zhejiang, China
5. The jack is bent, broken or missing The quality of the self-made ejector is good, which means that the processing cost is too high. Nowadays, standard parts are usually used, and the quality is average. If the gap bet...
1.Guiding column damage The guide post mainly plays a guiding role in the mold to ensure that the molding surfaces of the core and the cavity do not touch each other under any circumstances, and the guide post cannot be ...
1. ABS: high fluidity, low cost, suitable for parts that are not too demanding in strength (parts that are not directly impacted and do not withstand structural durability in reliability testing), such as internal suppor...
There are many types of plastic molds. Even if the same type of molds have different starting and precision requirements due to different types of molded plastics, the assembly methods are not the same. Therefore, the as...
Plastic mold design is based on the correct plastic product design. Mold design and manufacturing are closely related to plastic processing. The success or failure of plastic processing depends to a large extent on the m...
When designing the mold, the position and size requirements of the gate are strict. After the initial test, the gate size needs to be further modified. No matter which gate is used, the opening position has a great influ...